ID 150 Dynamic Axial Compression DAC Column / HPLC Column
Equipment Introduction
Equipped with a dynamic axial compression column 100mm pilot scale
system, make use of H-TREE
patent distribution system, with good separation. Preparative
column and packed column system with
integrated design, column packing process is very simple, 10μm
fillers can achieve almost the same
high analytical column injection efficiency preparative column
cargo is available online, without having
to remove, and always within the column bed maintaining axial
dynamic pressure, to maintain the
column bed long-term stability and efficiency, a single sample
volume can be better achieved about 5g,
this product is ideal for preparing small amounts of pure
customers.
The Characters of 150DAC System
Column packing convenience, the operator can own column packing.
Column efficiency keeps and maintains long life time.
Using H-TREE patented distribution design, good separation.
Easy to move the entire system can be adapted to different
locations experimental work.
Dynamic axial compression column according to user needs.
Injection mode available for separately pump or valve.
Max and min pressure adjustable, higher than the maximum pressure
immediately stop the
pump, the pressure below the minimum delay 2min automatically stops
the pump.
According to user needs configure automatic or manual collection
device. .
Technical Parameters
Column
Column Tube Diameter: ID 150 mm, length 650 mm (standard)
Column Pipe Material:
Wall Roughness: Ra ≤ 0.4 μm
Piston Material: 316 L stainless steel
Sieve Material: 316 L stainless steel, aperture: 3- 5 μm
Maximum Pressure: 10 MPa
Pressure Demand: ≥ 0.8 MPa
Air flow Demand : ≥ 3 m3
Pump
Infusion Working Mode: Dual piston reciprocating pump
Pump Head: 250 mL or 500 mL Stainless steel pump head Pressure
Maximum Working : 10MPa
Flow Range: ( 0 ~ 1000 ) mL / min
Flow Accuracy: ± 1.5 %
Flow Repeatability: RSD ≤ 1.0 %
Detector
Working Mode: Isocratic or Gradient
Wavelength Range: (190 ~ 700) nm
Light Source: Deuterium lamp (standard configuration); tungsten lamp (Optional
available)
Wavelength Accuracy: ± 2 nm
Wavelength Repeatability: 0.4 nm
Detection Range: ( 0~2 ) AU
Baseline Noise: 3 X 10-5 AU
Baseline Drift: 1 X 10-3 AU/h
~
